Your boat might already be protected with Dirty Anchor® Protect, Finish, or Guard, but every seasoned boater knows that the battle against salt, UV, and friction never stops. Even the best marine ceramic coatings benefit from maintenance—and that’s where the Dirty Anchor® Boost Kit comes in.

Think of Boost as your coating’s best friend: a rejuvenating layer that restores slickness, reduces drag, and keeps your surfaces cleaner for longer. Designed for DIY boaters and enthusiasts, Boost gives your coatings a refresh that ensures your investment continues to perform season after season.

Why Boost Exists

Dirty Anchor’s Protect, Finish, Shield, and Guard coatings already offer world-class protection but after months of exposure to sun, spray, and grime, even the toughest coatings can lose their edge.

That’s why Dirty Anchor® Boost was developed: to serve as an active wear layer on top of your base coatings. Applied periodically, it replenishes the surface’s hydrophobic properties, reduces friction, and helps your coatings last years longer.

And here’s the best part, it’s just as easy to use as it is effective.

What Makes Boost Special

1. Designed for Layering

Boost isn’t a replacement for your coating, it’s the finishing touch that keeps it performing like new. Use it on top of Protect, Finish, Shield, or Guard to restore that deep gloss and slickness that makes water bead and dirt roll off effortlessly.

2. Active Protection

The Boost formula adds a microscopic wear layer that takes the beating so your ceramic coating doesn’t have to. It’s like adding armor over armor, ensuring your base layer stays intact through countless washes and heavy use.

3. Works on Its Own Too

No base coating? No problem. Boost can be used alone on any clean, smooth surface to deliver instant shine, protection, and easy cleanup. From hulls to helm consoles, it gives your surfaces a fresh, hydrophobic finish in minutes.

4. Effortless DIY Application

No buffers, no machines—just spray, wipe, and admire. Dirty Anchor designed Boost so any boater can apply it with confidence, even at the dock or marina.

What’s Inside the Dirty Anchor® Boost Kit

Each kit comes with everything you need for multiple applications and ongoing maintenance:

• 16oz bottle of Dirty Anchor® Prep (surface cleaner and bonding agent)
• 16oz bottle of Dirty Anchor® Boost (protective top coat)
• Microfiber Buffing Towels
• Pairs of Rubber Gloves
• How to Apply Boost (Step-by-Step)

1. Clean the Surface: Make sure your surface is free of dirt, salt, and grime. For best bonding, use Dirty Anchor® Prep before applying Boost.
2. Spray Boost Evenly: Thoroughly spray Boost onto the clean surface. You don’t need to overdo it, just a light, even mist across the area.
3. Spread the Product: Using a clean microfiber towel, lightly spread Boost across the surface so it’s evenly distributed.
4. Buff to Perfection: Take a second clean, dry microfiber towel and gently wipe away excess product, revealing an instant glossy, slick finish.

You can apply multiple coats for enhanced protection or deeper gloss. Reapply monthly—or as needed to maintain the ultimate shine and hydrophobic performance.

The Real-World Results

After a single application, you’ll notice:
- Surfaces feel ultra-slick to the touch.
- Water beads and sheets off instantly.
- Dirt, grime, and salt wipe away with ease.
- That “wet mirror” gloss returns to life.
Whether you’re maintaining a high-gloss hull, keeping your dock box spotless, or refreshing your PWC’s finish after a long weekend on the water, Boost delivers the satisfaction of professional detailing without the cost.

Expert Tips for Maximum Longevity

- Apply in the shade or indoors for best results.
- Always work with clean microfiber towels to avoid streaks.
- Layer Boost monthly if your boat lives in saltwater environments.
- Use Dirty Anchor® Prep before each application to ensure perfect bonding.
Consistency is key, think of Boost as your coating’s maintenance check-up.

The Dirty Anchor® Difference

Dirty Anchor doesn’t make generic products for every surface under the sun. Every formula, Protect, Shield, Guard, and now Boost—is designed by boaters for boaters.

Boost embodies that philosophy perfectly. It’s about long-term performance, simplicity, and real-world reliability. When you use Boost, you’re not just maintaining your boat, you’re keeping it in the same shape it was the day you fell in love with it.

FAQ: Dirty Anchor® Boost Kit

Q: Can I use Boost without applying Protect or Guard first?
A: Absolutely. While Boost shines brightest as a topper, it also performs beautifully on its own for quick protection and gloss.

Q: How often should I reapply?
A: We recommend monthly applications depending on usage and environmental exposure.

Q: Can I use Boost on PWCs or dock boxes?
A: Yes! Boost is safe and effective on fiberglass, gelcoat, powder coat, and painted surfaces, including PWCs, dock boxes, and ATVs.

Q: Does Boost add UV protection?
A: Yes. Boost enhances UV resistance and preserves your base coatings from weathering.

Q: Is it safe for vinyl or plastics?
A: For vinyl or flexible materials, we recommend Dirty Anchor’s Vinyl Kit, but Boost is safe on hard, non-porous surfaces.

Conclusion: Keep the Shine Alive

Your ceramic coating is an investment, one worth maintaining. The Dirty Anchor® Boost Kit ensures your coating’s performance doesn’t just last, but improves over time.

With effortless application, superior slickness, and long-lasting protection, Boost is the final step in the Dirty Anchor system that keeps your vessel and everything around it, looking its best year after year.

⚓ Stay Shiny. Join Our Crew.
Learn more and order your Boost Kit today at dirtyanchor.com